Insulation Company in Fontana — Same-Day Service, Done Right the First Time

✓ Licensed & Insured ⏱ 1-hour response ✓ Free estimates
Call (866) 271-1602
🛡 Licensed & Insured ⏱ 1-hour Response 💲 Upfront Pricing · Free Estimates

Insulation Company in Fontana, CA

Blown in insulation is the most common service we handle in Fontana, and it solves the single biggest comfort problem in this city: attics that turn into ovens by 10 a.m. during the summer. Fontana sits in the Inland Empire’s wind-and-heat corridor at the base of the Cajon Pass, where summer temperatures routinely exceed 100°F and Santa Ana winds blast through. Older tract homes built for Kaiser Steel workers during the 1950s and 1960s often still have their original R-11 batt or barely-there blown material. That’s a thermal boundary failure, and fixing it starts with a phone call to (866) 271-1602.

Call (866) 271-1602

Why Fontana Homes Are Different

Fontana isn’t coastal California, and insulation spec’d like it is performs badly here. The city sits directly under the Cajon Pass funnel, which means two things: sustained triple-digit stretches from June through September, and hot, dry foehn winds that scour attic insulation and push heat through every unsealed gap. Most of the older housing stock south of Foothill Boulevard was put up between 1945 and 1965. Those tract homes were built for mill workers, insulated to mid-century standards that amount to R-11 or less in the attic. Some still have the original blown material, settled into lumps after 60 years of wind and heat cycles. The north and west edges of the city, places like the Summit Heights area and newer developments off Duncan Canyon Road, have post-1980s construction with better initial insulation, but even those homes struggle with radiant heat gain through the roof deck when the Santa Anas kick up. Our job in Fontana is matching the right material and the right install method to a housing stock that spans seven decades and a climate that punishes shortcuts.

Our Main Fontana Services

Two services cover most of what Fontana homeowners call us about. Here’s the short version of each, with a link to the dedicated page if you want the full detail.

Attic Insulation in Fontana

Most Fontana attics we inspect are under-insulated by half or more. The goal in this climate is building a thermal boundary at the attic floor, using batt, blown, or a hybrid approach depending on what’s already up there. Older south-side homes often need full removal first, because settled, wind-scoured material from the steel-mill era can’t simply be topped off. Read more on our Attic Insulation in Fontana page.

Attic Insulation in Fontana

Spray Foam Insulation in Fontana

Spray foam earns its higher price in Fontana when the job calls for air sealing as much as thermal resistance. Cathedral ceilings, bonus rooms over garages, and rim joists are the typical candidates. Closed-cell foam also stands up better than fiberglass to the wind-driven air exchange common in homes near the pass. Get the full breakdown at Spray Foam Insulation in Fontana.

Spray Foam Insulation in Fontana
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 271-1602

What happens when you call

  1. 1
    A real person answersNo phone trees — you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Blown In Insulation in Fontana

Blown in insulation in Fontana is the most common project we tackle because most of the city’s housing stock was insulated to standards from 60 years ago. Homes built in the Kaiser Steel era, especially the tract neighborhoods south of Foothill Boulevard, often have R-11 or less in the attic, and what’s there has settled or been wind-scoured. Blown in material lets us reach a proper R-value quickly and evenly across an irregular attic floor, gaps included. We install both fiberglass and cellulose blown material, and both have a role depending on the home. The full service breakdown is on our Blown In Insulation page. Here’s what Fontana homeowners should expect.

Cellulose Insulation

Signs you need it

Your attic insulation has settled below the top of the ceiling joists, or you can see bare spots where wind has pushed material away from the eaves.

What it costs in Fontana

Cellulose blown into an average Fontana attic runs $1,450 to $2,450 depending on depth needed and the current condition of what’s up there.

How we do it

We air-seal the attic floor penetrations first, then blow GreenFiber cellulose to the target depth with a dense-pack machine, confirming R-value as we go.

Blown In Attic Insulation

Signs you need it

Upstairs rooms run 10 to 15 degrees hotter than the rest of the house during a Fontana summer afternoon, and the AC can’t hold temperature.

What it costs in Fontana

Most blown in attic insulation projects in Fontana land between $1,200 and $2,800, with larger ranch-style homes at the upper end.

How we do it

We run a hose to the attic, blow loose fiberglass or cellulose to the full specified depth, and leave a consistent, even layer without gaps or compression.

Blown In Fiberglass Insulation

Signs you need it

You want attic insulation that won’t settle as much over time and you prefer a lightweight, moisture-resistant option.

What it costs in Fontana

Blown in fiberglass in Fontana typically runs $1,200 to $2,500 for a standard attic, before any removal work if old material needs to come out.

How we do it

We fluff and blow the fiberglass to the manufacturer’s specified density for the target R-value, then check coverage with a depth gauge across the entire attic floor.

What Blown In Insulation Costs in Fontana

Item Typical range in Fontana
Blown in attic insulation (standard attic) $1,200 – $2,800
Blown in cellulose insulation $1,450 – $2,450
Blown in fiberglass insulation $1,200 – $2,500

Can you do blown in insulation on a house with old settled material?

Yes. We remove or level the existing material first, then blow new insulation to the target depth. In Fontana’s 1950s tract homes, we often find the original material compressed below R-11 and recommend replacement rather than topping off, since settled material doesn’t just disappear. Call (866) 271-1602 for a free attic inspection and a straight answer.

How long does blown in insulation last in Fontana’s heat?

Cellulose and fiberglass blown material both hold up for decades if installed correctly, with fiberglass resisting settling better. Fontana’s high attic temperatures don’t degrade either material, but wind intrusion through soffit vents can shift loose material over years, which is why proper baffles and sealing matter as much as the insulation itself. Call (866) 271-1602 to schedule an attic check.

Brands We Service in Fontana

We carry Knauf and CertainTeed fiberglass for blown and batt work, Rockwool mineral wool for fire resistance and sound dampening, and Icynene spray foam for air-sealing jobs where blanket material falls short. Stock for common Fontana attics is usually available within a few days. More detail is on our brands page.

Pricing for Insulation Company in Fontana, CA

Service Typical range in Fontana
Blown in attic insulation $1,200 – $2,800
Blown in cellulose insulation $1,450 – $2,450
Blown in fiberglass insulation $1,200 – $2,500
Batt attic insulation (R-38) $1,800 – $3,400
Open-cell spray foam (attic) $2,800 – $5,600
Closed-cell spray foam (attic) $4,000 – $7,500
Wall injection foam (retrofit) $3,000 – $6,500
Crawl space encapsulation + insulation $3,500 – $8,000

What pushes price up in Fontana is usually the age of the house: full removal of settled, wind-scoured material from a 1950s attic adds labor, and deeper attics need more material to hit the same R-value. Every quote we give is upfront and line-itemed, so you see exactly what you’re paying for before we start.

Neighborhoods We Serve in Fontana

We work across Fontana’s older core and the newer subdivisions on the north and west edges. Response time for most Fontana neighborhoods is same-week for estimates, with same-day scheduling often available during the off-peak months.

  • Summit Heights
  • Downtown Fontana
  • Walnut Village
  • Morningside
  • Coyote Canyon

Service Area – Cities Near Fontana

Fontana Insulation serves the surrounding Inland Empire communities where the same high-heat, wind-driven conditions apply. If you’re in Bloomington, CA, Rialto, CA, Glen Avon, CA, or Pedley, CA, we handle jobs in those areas with the same material-agnostic approach and local knowledge of the housing stock.

Serving Fontana, CA — Our Local Coverage Area

We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs About Insulation Company in Fontana

Ready to get started? Free estimates · 1-hour response in Fontana
Call (866) 271-1602

What happens when you call

  1. 1
    A real person answersNo phone trees — talk to a local insulation pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 1-hour.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Fontana Customers Say

★★★★★ 4.8 from 4+ reviews

"Installed baffles at the soffits so the new insulation didn't block the ventilation, which the previous contractor apparently never considered."

— Michelle Bennett

"Attic was at maybe R-11 from the 1970s and blown in over the top would have just buried the problem. They removed the old material, air sealed the top plates and penetrations first, then blew in to R-49. The upstairs is a completely different house in August."

— Sarah Fletcher

"Work is good and the house is noticeably more comfortable. There was insulation debris left in the hall closet under the attic access that I had to clean up."

— Holly Mercer

How It Works in Fontana

Getting your insulation handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your insulation needs and we provide an upfront, transparent quote — no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Fontana — typically within 30–60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Fontana — we'll get back to you fast. No obligation.

By requesting your free estimate, you acknowledge our Privacy Policy and consent to receive communications through phone, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Now
Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch