Reflectix Insulation in Bloomington, CA

Reflectix Insulation in Bloomington, CA | Fontana Insulation

We provide independent Reflectix installation and repair across Bloomington, and the work here is driven by one thing: attic heat gain. A 140°F attic deck radiating into a mid-century stucco home off Route 66 is a different problem than what coastal or high-desert contractors deal with. Our crew sizes, cuts, and installs Reflectix radiant barrier correctly against roof decks, rafters, and knee walls in 92316, and we know where it helps and where it doesn’t. Call (866) 271-1602 for a straight answer about your attic.

Call (866) 271-1602

Why Bloomington Residents Choose Us for Reflectix Service

Noel Arredondo grew up off Cherry Avenue in Fontana and has spent his working life in the Inland Empire. He learned building systems at Chaffey College in Rancho Cucamonga, then spent years in the field learning what actually holds up under a San Bernardino County summer. That background matters when you’re talking about reflective foil, because Reflectix only performs if it’s installed with the right air gap, the right perforation, and the right seam sealing. Get any of those wrong and you’ve bought shiny attic wallpaper.

We’re an independent Reflectix service provider, not a manufacturer affiliate or authorized dealer. That independence means we recommend Reflectix when it fits the house, and we tell you when it doesn’t. We also handle Reflectix sales & service with genuine rolls and Reflectix-brand seam tape, because the adhesive has to survive inland heat without peeling. Most Bloomington attics we enter haven’t been touched in decades, so we’re often the first people to see what’s actually under the roof deck.

Common Reflectix Insulation Problems We Solve in Bloomington

• Foil facing baked brittle and delaminated. Years under a 140°F+ attic deck on a low-pitch Bloomington roof with no shade tree will cook the reflective facing until it flakes off. We see this constantly in the older unincorporated pockets. If the facing is gone, the foil is doing nothing.
• Reflectix stapled directly against the roof deck with no air gap. This is the single most common install mistake we correct in Bloomington. Without a gap the foil conducts heat instead of reflecting it, and the attic gets hotter. Ripping it down and re-gapping it usually saves the material.
• Perforated vs. non-perforated foil used in the wrong spot. Non-perforated Reflectix against roof decking in shoulder season traps moisture against the sheathing. We find condensation stains, musty smells, and sometimes softening OSB. Perforated foil belongs on the deck; non-perforated belongs on walls.
• Bubble-pack foil compressed or punctured. Homeowners walking the attic to store holiday bins or run phone lines crush the bubble core flat. A compressed Reflectix roll becomes a dead reflective zone. If the foil is intact elsewhere, we patch and reseal rather than tear the whole run out.
• Original kraft-faced batts slumped and baked alongside failed Radiant Barrier. In Bloomington’s 1940s – 1970s tract homes, we often find both failures at once: old batts that have settled to R-11 or less, plus foil that’s done. The fix is usually air-seal, re-gap the foil, and top up the attic. It’s a sequence that works far better than either step alone.

Reflectix Service in Bloomington: What Local Conditions Mean for Your Equipment

Bloomington’s 92316 tract homes along old Route 66 were built with shallow attics and almost no shade trees on the flat inland lots. That means radiant barrier work here has to be done in tight, hot cavities where the foil gap is measured in inches, not feet. On a mid-century stucco home off the old Route 66 corridor, our tech found original kraft-faced batts slumped and baked flat, plus a bare roof deck radiating straight into the living space. We pulled the dead batts, air-sealed the top plates, installed perforated Reflectix radiant barrier foil across the roof deck with a proper air gap, then topped the attic with blown-in insulation. Attic temps dropped, and the homeowner’s summer cooling bill followed. That’s not a pitch, it’s what we do. In Bloomington, the radiant barrier decision isn’t about winter cold at all, it’s about how much of the sun’s heat you can keep out of the living space from April through October. If you’re in one of the older manufactured or mobile homes in the unincorporated pockets, the cavity and framing are different, and the foil approach has to adapt to the structure, not the other way around.

Reflectix Models & Products We Service in Bloomington

We work with the full Reflectix lineup: Double Reflective Insulation Roll, Radiant Barrier Foil, Reflective Foam Core Insulation, and Reflectix insulation tape. The double reflective rolls go on knee walls and duct runs. Perforated radiant barrier foil goes on roof decks. Reflective foam core works for garage doors and shop walls. Genuine Reflectix seam tape seals the overlaps so the reflective surface stays continuous. We stock common widths locally for fast Bloomington turnaround, which matters when a homeowner calls us in July and the attic can’t wait.

Reflectix Service Pricing in Bloomington

FAQs – Reflectix Insulation in Bloomington

Does Reflectix radiant barrier actually work in a Bloomington attic that hits 140°F?
Yes, if it’s installed with the right air gap and perforation. Reflectix works by reflecting radiant heat, not by adding R-value. The air gap is what makes it work; without one, it conducts heat and can make the attic worse. In Bloomington’s shallow cavities, getting that gap right is the difference between a 15°F attic temperature drop and wasted material.

Why is the Reflectix foil in my attic torn or crumbly?
Sun exposure and heat cycling break down the reflective facing over time. In a Bloomington attic that sits above 130°F for months, the facing bakes and flakes. If the bubble core is intact, we can often re-face or patch the affected areas rather than replace the whole run.

Should I use perforated or non-perforated Reflectix on my roof deck?
Perforated. Perforated foil lets moisture vapor escape instead of trapping it against the sheathing. Non-perforated on a roof deck in Bloomington’s shoulder season causes condensation, mold, and sheathing rot. We see that mistake often enough that we check before we quote.

Can you add Reflectix without removing my old batts?
Sometimes. If the old batts are dry, uncompressed, and reasonably intact, we can install radiant barrier above them and seal the air leaks. If they’re baked flat and sun-degraded, leaving them there just buries the problem. We’ll tell you which situation you have before we start work.

Do Bloomington’s manufactured and mobile homes have different Reflectix needs?
Yes. Manufactured and mobile homes in the older unincorporated pockets have shallower roof cavities and different framing than stick-built tract homes. The foil needs to be sized and gapped for that structure, and sometimes a reflective foam core product makes more sense than bubble-pack. Call (866) 271-1602 and we’ll tell you what fits your roofline.

Service Areas Near Bloomington

We install and repair Reflectix across Bloomington and the neighboring Inland Empire cities. If you’re in Avocado Heights, Sedco Hills, Monrovia, Rancho Santa Margarita, Anaheim, or Tustin, we cover those service areas too. For radiant barrier work in those communities, see Reflectix service in Rialto and Reflectix service in Sunnyslope. For the full Bloomington coverage area, visit our Bloomington service area page.

Book Your Reflectix Service in Bloomington Today

If your Bloomington attic is baking and you want to know whether Reflectix will actually help, call (866) 271-1602. We’ll schedule an attic inspection, give you a straight answer, and if the foil makes sense for your roof, we can often get it installed the same week.

Written by Noel Arredondo, Owner at Fontana Insulation. The right insulation is the one that fits your house, not the one with the biggest margin.